Insane Signs Logo
Products Tab
 
 

TERMS AND CONDITIONS

BANNERS AND BILLBOARDS - BANNER MESH - SHADECLOTH - DIGITAL PRINTING - BOATS AND SHIPS - VEHICLES
CUSTOM DIE CUT STICKERS - LIGHTBOXES - A FRAMES - SHOP FRONTS - GRAPHIC DESIGN - MAGNETIC
RETRACTABLE BANNERS -
SAFETY AND REFLECTIVE

BANNERs and billboards
Whether you need a small banner for that fun bitrhday party or a flexible siding for your 18 wheeler truck, or maybe even a theatre backdrop, we can print your banner in house.

Because of the size of our new printer, it gives us the ability to print up to 5 metres in height by any length, no joins - a continuous perfect print!
Add the fact that with a few simple clicks of a mouse, we can have our 5m digital printer print in any of our 3 colour modes; 4, 6 or 8.

We can also print double sided banners lined up to the exact millimetre on each side, utilizing the special features of our largest printer which has the capabilities to print and align the two prints so that they are an exact mirror image back to back. (This feature is not usually available in most 5 metre printers.)

If you have a large lightbox dsplay we can print the skin for your light box in house on back lit banner material.

There are several ways we can finish your banner. You can have a 50mm reinforcing welded at over 600ºc around the perimiter of your banner to make it almost tear proof. Into this we punch stainless steel (not brass) eyelets. If your banner is to be installed into sail track, we can weld the kedar roping in-house. If the banner requires a pocket or pockets to slide over a rod, we can weld them to your specifications.

We now proudly possess the only 5 metre true solvent digital printer between Sydney and Brisbane and have the ability to print at speeds of up to and over 120+ square metres per hour (depending on the resolution required for each job). YES we can have your job ready and on time! Even when your back is to the wall, and you've got to have it ASAP!

BANNER MESH
Do you need to wrap your:
Construction site fence? Sporting event fence for sponsors? Multi story scoffolding? Outdoor concert fence for crowd control?

All our building mesh is printed, welded and eyeletted in house.
We digitally print our mesh up to 5 metres in height by any length. We can print from edge to edge and end to end.
The building mesh can be used to wrap around a construction site fence or even higher up on a multiple floor construction site because the mesh "breathes" and permits air flow.

It is supplied with a 50mm reinforcing welded at over 600ºc, creating a tear proof perimiter. Then stainless steel eyelets are punched through the reinforcing, as these were found to be significantly stronger and longer lasting than the brass eyelets, thus giving it the strongest support and making for easy installation.

Standard sizes we keep in stock are:
1.6 x 50m
1.8 x 50m
3.2 x 50m
5.0 x 50m

Rolls can also be cut to size, meaning a 1.6m roll can be cut into 2 x .8m smaller rolls and/or taking the 50m and cutting it into divisions to make smaller "banners".

We can incorporate all your safety signs that you need for your site printed directly onto the mesh.
There is no minimum order.
There are no set up fees.
Send us your logo and we will manufacture a sample free of charge for you!
We will provide a mock-up free of charge so there is no guess work as to what will be provided.

We currently do approx 10 kilometres of this mesh per month, and the qantity is increasing, only proving that our mesh customers ar extremely satisfied with the superior quality of our product and, of course, the unbelievably competitive price. In fact, based on our customer feedback we believe that the mesh we are currently producing is the best quality available on the market today, and with a UV outdoor life of 2+ years, if it is looked after properly can be used and reused on multiple job sites.
With the size and speed of our printer and finishing setup, we can print 3 rolls at 1.6 side by side. YES - We can have your job ready on time!

SHADECLOTH
All of our shadecloth is digitally printed in house and we can print from edge to edge.
The shadecloth can be used to wrap around a construction site fence or even higher up on a multiple floor construction site because the mesh "breathes" and permits air flow.
It is supplied as a 1.83 x 50m rolls only. We do not supply part rolls.
The rolls do not have any perimeter welded edge but have button holes ready to cable tie it to a fence.

We can incorporate all your safety signs that you need for your site printed directly onto the shadecloth.
There is no minimum order.
There are no set up fees.
Send us your logo and we will manufacture a sample free of charge for you!
We will provide a mock-up free of charge so there is no guess work as to what will be provided.
TOP OF PAGE

DIGITAL PRINTING
We have just recently added another printer to our line up, so now with 2 digital printers on site so we can handle any job no matter what the size.
We can digitally print with high resolution as high as 1400dpi.
If you are looking for a truck canopy, stage backdrop, billboard, whatever it may be, we can do it all in house with no joins or seams.
If it comes on a roll and is up to 10mm thick, we can print on it - YES - we can print on carpet!
Because of the size of our new printer, it gives us the ability to print up to 5 metres in height by any length, no joins - a continuous perfect print!
Add the fact that with a few simple clicks of a mouse, we can have our 5m digital printer print in any of our 3 colour modes; 4, 6 or 8.
The widest media we can print on is 5 metres.
TOP OF PAGE

BOATS & SHIPS

From your rego numbers on a jetski to a name on a ship in the dry dock, we can create the perfect signage.
TOP OF PAGE

VEHICLES

Whether it's computer cut vinyl, or a partial wrap, a digital print or a full wrap we can create the perfect signage for your vehicle.
TOP OF PAGE

CUSTOM DIE CUT STICKERS

We manufacture all types of stickers, from safety and signage stickers in bulk, through to one off designs for personal use.

Stickers for the most part are digitally printed onto self adhesive vinyl, but they can also be printed onto reflective vinyl or even on photo luminescent (glow in the dark) vinyl.

We are not governed by simple geometric shapes for any sticker, our state of the art cutting machine can cut your sticker to any shape that you design.

When manufacturing stickers, the standard process is that the vinyl is cut in the stickers shape, leaving the unused part of the vinyl to be removed. What remains is the cut sticker on the backing sheet to be trimmed, normally with a straight edge and a knife. If you do have a sticker with an irregular shape this process does not change and even though it may be technically more difficult, it still must be trimmed with a blade and straight edge. However at Insane Signs we have the ability to die cut the sticker, meaning that we can cut the vinyl and backing sheet at the same time and it can be cut to any irregular shape that is required.
You might want several stickers to be regularly cut and arranged on a sheet that is die cut - with the technology we have it's easy!

Time to think outside the box because we can cut to any shape you need.

Small or large production runs are no problem, we can do a couple of stickers to runs of 1000's - all with the exacting digital print quality and lazer precision cutting every time, so sticker number 1 is identical to sticker 8001 or 80,001.
TOP OF PAGE

LIGHT BOXES

Our light boxes are custom made to your specifications.

We work with a fabrication company to manufacture the light box frames for us. They are made from extruded 150mm aluminium, and they each have at least a 50 x 50mm frame welded inside the extrusion to give it strength and support. We then fit out the electronics and make the sign faces ready for installation.

We can install your light box, BUT we are legally not allowed to make the final hookup to electric, this must be done by a certified electrican and we do have access to certified electricians who are available to make the final connection for you.
TOP OF PAGE

A FRAMES

Our standard A-Frames come in the following 2 sizes:
600 x 900mm tall - with 2 handles on the top so it can be carried.
900 x 1200mm tall - we can fit wheels so it can be wheeled in and out.
Or we can custom build an A-Frame to your specifications.
The A-frame can come in a white or black steel frame with any artwork of your choice.

Some possibilities for your A-Frame could include:
Logo on top and an area for a coarse black board for use with chalk underneath for daily specials etc.
Logo on top and an area for a white board for use with a dry erase marker underneath for daily specials etc.
Logo on top and an area for a smooth black board for use with liquid chalk pens underneath for daily specials etc.
The A-frame could have Corflute® inserts on both sides, the 600 x 900mm size is best for this application.
A full colour digital print on both sides.
Cut vinyl wording on both sides
TOP OF PAGE

SHOP FRONTS

Our graphic designer can work with you to create the ideal shop front.
OR
We can follow your corporate specifications.
There are many ways and many products available to do a shop front, call or stop by and we can discuss the many options available.
TOP OF PAGE

GRAPHIC DESIGN

We have graphic artists on staff, if you have an idea or a concept and want it drawn, stop by and talk to us.
We are very at home with the Adobe® Suite of applications.
I am sure that we can turn your idea into signage with a smile.
TOP OF PAGE

MAGNETIC

Normally most magnetic signage is used on vehicles when a businesses needs to temporarily identify a vehicle for a specific reason.

There are 2 standard grades of magnetic:
Refrigerator type magnets, normally smaller and thinner in size.
Vehicle magnetic, usually thicker and larger, a heavier grade, with stronger magnetism.
To finish your vehicle magnets we can apply either computer cut vinyl, or a digital print and laminate.
There is no difference in the type of signage that can be created for magnetic, whatever can be done on general signage can also be done on magnetic.
Just keep in mind that when not in use it needs to be stored flat. This is because it is thicker, and if it is not stored flat it will retain the shape it was in when you try to apply it to the vehicle. This means it won't hug the vehicle and will allow air to flow underneath the magnet once you start driving, so by the time you get to your destination the magnet will probably be long gone.
TOP OF PAGE

RETRACTABLE BANNERS

The retractable banner stand features include aluminium construction, light weight and portable, quick set up, durable carry bag and the biggest plus - they are affordable.
The retractable banner stand is ideal for exhibitions, conferences, seminars, presentations, and point-of-purchase displays.
They can be digitally printed on a regular banner material or on polypropelene, and are available in a myriad of sizes.
TOP OF PAGE

SAFETY & REFLECTIVE

We currently do safety and reflective signs for mines throughout the country.
Most metal signs are on either Colourbond® or on Aluminium sheeting.
Some popular options for this type of signage are:
Standard metal signs that are not reflective.
Photoluminescent signs, that glow in the dark (exit signs if the lights go out)
Category 2 reflective, can be used for non road signage.
Category 1 reflective, to be used for road signage.
Reflective Stickers

Not all reflective is used for signs - some are used for stickers.

We manufacture reflective stickers that range from small hat stickers for miners to larger reflective stickers that are put on vehicles.

Most safety signs come under these categories:
Danger, Warning, Caution, Prohibited, Mandatory, Fire, Dangerous goods.
BACK TO TOP